NX Intelligent BCMS

See Every Branch. Power Decisions With Data.

NX Intelligent BCMS is branch-circuit monitoring built into the panel — not bolted on. Measure current, voltage, energy and power quality at every position with +/-0.5% true-RMS accuracy, view it on a local touchscreen or from anywhere, and stream it straight to your BMS, DCIM or NOC. Built for what's next.

Start Your Project

NX Series RPP with integrated NX Intelligent BCMS monitoring

What It Is

Monitoring Engineered Into the Panel

In high-density data centers and AI/hyperscale halls, what you can't measure becomes risk — stranded capacity, surprise overloads, blind spots between the meter and the rack. NX Intelligent BCMS closes those gaps with metering integrated directly into your NX Series RPP, capturing every branch circuit in real time.

It is DIN-rail modular and fully scalable, so a panel is provisioned to match exactly the positions you deploy today and grows as you add load. All of it runs behind a closed door — no exposed busbar, no breaker access required to read live data.

Integrated branch-circuit monitoring across up to 84 single-pole positions
+/-0.5% true-RMS measurement on current, voltage, energy and power quality
DIN-rail modular and scalable to your configuration
Closed-door operation for safer day-to-day reads

Spec Your System

How It Works

Local Touchscreen. Remote Visibility. One Source of Truth.

From the front of the panel to your operations center, NX Intelligent BCMS gives every team the same accurate data — without ever opening a door.

🔌

Sense at Every Branch

Modular DIN-rail sensors meter each branch circuit individually, capturing true-RMS current, voltage, energy and power-quality data at the source.

⚙

Read at the Panel

An integrated local touchscreen surfaces live load, trends and alarms right at the RPP — no laptop, no breaker access, door stays closed.

⚡

Stream to Your Stack

The same data flows remotely to your BMS, DCIM or NOC, so capacity planners and on-call teams work from one trusted measurement.

NX Series RPP deployed in a data center white space

What It Monitors

Measured to +/-0.5% True-RMS

Accuracy is the difference between confident capacity decisions and conservative guesses. NX Intelligent BCMS meters the values that matter for billing, planning and protection — at metering-grade precision, per branch.

Current — per-branch true-RMS load, with thresholds for early warning
Voltage — phase and system voltage for balance and quality
Energy — kWh consumption for chargeback, allocation and reporting
Power quality — the metrics that reveal harmonics and imbalance before they bite

Talk to Engineering

+/-0.5%

True-RMS Accuracy

Metering-grade precision on current, voltage, energy and power quality.

84

Branch Positions

Monitor up to 84 single-pole branch positions per NX Series RPP.

Closed-Door

Safe Operation

Read live data without exposing busbar or opening the panel.

Why It Matters

From Raw Data to Real Decisions

Visibility is only useful when it changes what you do. NX Intelligent BCMS turns continuous measurement into capacity, uptime and safety.

▲

Capacity Planning

Know real load versus nameplate at every branch so you reclaim stranded capacity and add racks with confidence — supporting rapid expansion.

⏱

Alarms & Thresholds

Set per-circuit thresholds and get notified before a branch trends toward overload, so teams act early instead of reacting to a trip.

✓

Closed-Door Safety

Technicians read live current and voltage without opening the panel or approaching energized parts — lower risk, fewer interruptions.

⚑

Energy Accountability

Per-branch kWh metering makes chargeback, tenant allocation and sustainability reporting straightforward and defensible.

⚡

Power Quality Visibility

Surface imbalance and quality issues early to protect sensitive AI and compute loads from disturbances that erode reliability.

⚙

Scales With You

Modular DIN-rail architecture means monitoring grows position by position as your deployment does — no rip and replace.

Where the Data Goes

One Measurement, Every System That Needs It

NX Intelligent BCMS is built to integrate, feeding the platforms your operations already run on.

⚙

BMS

Push branch-level power and energy into your building management system for unified facility oversight and trending.

▲

DCIM

Feed accurate per-circuit load into your DCIM platform so capacity and provisioning decisions run on real measurement.

🔌

NOC

Deliver alarms and live status to the NOC so on-call teams see developing issues in the same view they already watch.

Specifications

NX Intelligent BCMS at a Glance

Function	Integrated branch-circuit monitoring (BCMS)
Measured values	Current, voltage, energy, power quality
Accuracy	+/-0.5% true-RMS
Local interface	Integrated touchscreen at the panel
Remote access	Remote monitoring; BMS / DCIM / NOC integration
Architecture	DIN-rail modular and scalable
Operation	Closed-door reads — no breaker access required
Coverage	Up to 84 single-pole branch positions per NX Series RPP
Platform	Native to NX Series RPP — UL Listed, Siemens Approved OEM, Made in the USA, BABA-compliant

FAQ

Common Questions

Does monitoring require opening the panel?

No. NX Intelligent BCMS is designed for closed-door operation. Technicians read live current, voltage and energy from the integrated touchscreen without exposing busbar or accessing breakers.

How accurate is the metering?

All measured values — current, voltage, energy and power quality — are captured at +/-0.5% true-RMS, accurate enough for capacity planning, energy chargeback and power-quality analysis.

Can it integrate with our existing systems?

Yes. Data is available locally and remotely, and integrates with BMS, DCIM and NOC platforms so the same trusted measurement reaches every team.

Does it scale as we add load?

It does. The DIN-rail modular architecture is provisioned to your configuration and scales position by position, monitoring up to 84 single-pole branch positions per panel.

Is it built into the RPP or separate?

NX Intelligent BCMS is native to the NX Series RPP — engineered in, not added on — so monitoring ships as part of the panel you deploy.

What can I do with the data?

Reclaim stranded capacity, set per-circuit alarm thresholds, allocate energy for chargeback, and catch power-quality issues before they affect critical loads.